Nissan Micra Brakes
Nissan Micra brake servicing. Inspection of Nissan brake pipes, pads and brake operation.
Get your Nissan brakes serviced: Pipes, Discs, Rotors Pads, Hydraulic fluid, serviced and replaced as required based on manual service interval
Nissan Coolant/Anti-Freeze
Change Nissan Engine Coolant based on the Nissan required service time using the appropriate coolant concentration and quantity.
Nissan System Hoses
Inspect connecting pipes for flexibility, splitting or coolant leaks. Damaged pipes should be renewed
Nissan Thermostats and Valves
Problems with the Nissan Thermostat might be solved by replacing the thermostat.
Nissan Pump
If the Nissan water pump is powered by the timing belt consider changing the water pump when fitting a timing belt
Nissan Timing Belt (Cambelt)
Replace Nissan Cambelt according to the manufacturers required service period with the right Cambelt. Consider Changing the crankshaft oil seal and camshaft oil seal.
Nissan Cam Belt Purpose
The Cambelt - Timing Belt allows engine rotation and energy from the crankshaft to the camshaft matching valve function with piston operation .
Nissan Valve Timing
Timing Belts Control the Opening of Nissan Engine valves allowing fuel & air into the piston chamber and controlling the exhaust valve operation.
Nissan Timing Chain or Belt
If your Nissan has a timing chain then service life will be greatly extended
Nissan Oil Service
Change Nissan Engine Oil as recommended. Good Engine Oil coats moving parts, reducing friction, contains built-in corrosion protection lasting for several thousand miles.
Nissan Filter Change
Oil Filters are best renewed since they lose efficiency with a fine coating of sludge and dirt.
Nissan Inlet Air Filter, Diesel/Petrol Filter, Pollen Filter
Renew the filters as required; to optimise engine performance. Filters block. Consult your Nissan Service Manual for correct filter replacement intervals
Nissan Tyre Fitting
Change Nissan tyres when tyre wear. Check that tyre wear is uniform.
Nissan Tracking
if any tyres wear is uneven, make sure that the tracking is correct.