Ford Ka Brakes
Ford Ka brake servicing. Inspection of Ford brake pipes, pads and brake operation.
Get your Ford braking system inspected: Hydraulic fluid, Pipes, Pads, Discs, Rotors checked and changed as needed depending on manufacturers service interval
Ford Anti Freeze
Replace Ford coolant at the Ford required service period with the correct coolant to water mixture and amount.
Ford System Hoses
Hoses should be checked for brittleness, cracks or leaks. Suspect hoses should be replaced.
Ford Thermostats
Problems with the Ford Thermostat may be rectified by fitting a new thermostat.
Ford Coolant Pump
When the Ford Coolant Pump circulates with cambelt power consider changing the water pump when fitting a timing belt
Ford Cambelt (Timing Belt)
Ford Timing Belt should be changed according to the manual required service interval with the right Cambelt and possibly the camshaft and crankshaft oil seals.
Ford Cam Belt Purpose
Timing belts pass engine revolution position and power to the camshaft from the crankshaft synchronising valve opening and closing to piston cycle
Ford Inlet Outlet Valves
Timing Belts Control the Opening of Ford Engine valves to admit fuel and air and venting exhaust gases to the manifold.
Ford Timing Belt or Timing Chain
When the Ford uses a timing chain then service life should cover a longer period
Ford Oil Service
Ford Engines - Replace oil as recommended. Quality Engine Oil protects metal surfaces, reduces friction, contains built-in corrosion protection able to protect for 5000 miles or more.
Ford Filter Change
Engine Lube Oil Filters should be changed as they slow down oil flow with a build-up of dirt on the filter.
Ford Inlet Air Filter, Inline Fuel Filter, Pollen Filter
Renew the filters as required; to help your engine breathe. Filters block. Follow your Ford Manual and change filters as recommended
Ford Tyre Fitting
Ford Tyres - Replace road tyres when tyre wear. Look to see that tyre wear is even.
Ford Wheel Alignment
if any tyres wear is irregular, make sure that the vehicle wheel tracking has not been affected.